Installation of hydraulic winch

Installation of hydraulic winch
The hydraulic winch on the hydraulic winch has been widely used on obstacle clearing vehicles, and it is a key component commonly used in lifting and dragging traction belt courses. There are many specifications and models of hydraulic winches from light to ultra heavy, and common hydraulic winches have two types of construction: worm gear and gear transmission speed reduction. The winch is driven by an oil motor, which decelerates and expands the output torque according to the speed reduction equipment, thereby achieving the relative light load traction belt working ability of the winch. The structure of the worm gear hydraulic winch is relatively simple, and the manufacturing is casual. The efficiency of the transmission system and the manufacturing cost are relatively low. It is generally used for medium to light hydraulic winches, while the structure of the large planetary wheel hydraulic winch is relatively complex. Large deceleration ratio. The efficiency and manufacturing cost of the transmission system are relatively high, and it is generally used for medium and heavy hydraulic winches.

Installation and application of hydraulic winch on hydraulic winch
On obstacle clearing vehicles, the hydraulic winch on the hydraulic winch is mostly installed using the central installation method, and the side mounted hydraulic winch is gradually being used on some obstacle clearing vehicles. Generally, one or two winches are installed on obstacle clearing vehicles. According to the design plan, the steel wire rope for the winch can be used in two different rope exit directions: left and right. In order to better avoid disorderly steel wire ropes, the winch should be equipped with a pressure guide rope device. The use and installation of the winch and steel wire ropes in the cleaning vehicle are both important, as they are related to the technical and safety functions of the vehicle. Therefore, attention should be paid during installation and application.
The winch of the cleaning vehicle needs to be maintained and repaired on time in order to ensure its safe application and increase its service life. The lubricating grease in the winch box should be removed and replaced on time, usually once a year. Regularly inspect the winch and motor for leaks. It is necessary to regularly check whether the anchor bolts installed on the winch are loose, and to regularly check the wire rope for broken wires, damage, and deformation. The wire rope should be lubricated with lubricating fluid on time to ensure that the wire rope is damaged and replaced with a new one. Overall, strict application, maintenance, and upkeep of the winch must be carried out in accordance with standard regulations in order to use the winch and cleaning vehicle effectively.